Sensor & Device Test
See live readings from the sensors in your phone or tablet. This free sensor test shows the accelerometer, gyroscope and compass, your GPS position and accuracy, battery and network status, and lets you test the vibration motor, all without installing an app.
How to use this test
- Open this page on your phone or tablet.
- Tap "Enable" for each sensor group. Your browser may ask for permission (motion on iPhone, location everywhere).
- Move, tilt and rotate the device and watch the values change.
- For the compass, hold the device flat and turn slowly.
- Check the browser support list to see which sensors this browser can read at all.
What this test checks
Accelerometer and gyroscope
Acceleration with and without gravity (m/s²) and rotation rate (°/s) on three axes, plus the sensor update interval.
Compass and tilt
Compass heading and tilt (level), useful for checking a compass that points the wrong way or needs calibration.
GPS location
Latitude, longitude, accuracy, altitude, speed and course. Your position is only shown on this page.
Battery, network and light
Battery level and charging time, connection type and speed estimate, and the ambient light sensor where the browser exposes them.
Vibration motor
Plays a vibration pattern so you can confirm the motor works.
Reading the results and fixing common problems
No data from a sensor
The device may not have that sensor, or the browser does not expose it. Sensors also need a secure (HTTPS) page, which this site is.
Permission denied
Allow motion or location for this site in your browser settings and, on phones, in the system settings for the browser app. Then reload and tap Enable again.
The compass points the wrong way
Calibrate it by moving the phone in a figure-eight pattern, and stay away from magnets, speakers and metal surfaces.
Battery or vibration show "not supported"
These APIs are only available in some browsers. For example, iPhone Safari does not offer vibration or battery data to web pages.
Frequently asked questions
How do I test my phone sensors online?
Open this page on your phone, tap Enable for each sensor and allow the permission when asked. Then move and tilt the phone to see live values.
How do I check if my gyroscope is working?
Enable the motion sensors and rotate the phone. If the rotation rate values change smoothly on all three axes, the gyroscope works.
Is my location stored or shared?
No. Coordinates are read by your browser and shown only on this page. They are never stored or sent anywhere.
Why does it work on Android but not on iPhone?
Safari on iPhone requires a tap to allow motion sensors and does not support some APIs such as battery and vibration. Tap Enable and allow access when prompted.
Do I need to install an app?
No. The test runs entirely in your mobile browser.
Related tests
Touchscreen & Pen Test
Multi-touch point counter, dead-zone grid, pressure, stylus tilt and drawing test for touchscreens.
Open testSpeaker, Mic & Camera Test
Left/right speaker check, frequency sweep, microphone level & spectrum, webcam resolution and FPS.
Open testScreen & Refresh Rate Test
Dead pixel & color test, gradient banding, real monitor refresh rate (Hz) and a moving-object motion test.
Open test