Lihat halaman ini dalam Bahasa IndonesiaVer esta página en españolVer esta página em portuguêsDiese Seite auf Deutsch ansehen

Screen & Refresh Rate Test

Check your monitor, laptop or phone screen in a few minutes. This free display test fills the screen with solid colors to reveal dead and stuck pixels, shows gradients to expose banding, measures the real refresh rate in Hz, and runs moving objects to judge motion clarity.

Runs 100% in your browser, no data ever leaves your device
Loading the test…

How to use this test

  1. Clean the screen first, so dust is not mistaken for a pixel fault.
  2. In "Screen test", open each full-screen color pattern and look slowly across the whole screen for dots that do not match.
  3. Use the black pattern in a dim room to check for backlight bleed around the edges.
  4. Open "Refresh rate & motion" and wait a few seconds for the measured Hz to settle.
  5. Watch the moving objects to judge blur, ghosting and stutter.

What this test checks

Dead and stuck pixels

Solid red, green, blue, white and black screens make a faulty pixel stand out: a dead pixel stays black on bright colors, a stuck pixel stays one color on the others.

Backlight bleed and uniformity

A black screen in a dark room shows light leaking at the edges or corners, common on IPS and VA panels, and uneven brightness across the panel.

Color banding

Smooth gradients reveal visible steps instead of a smooth fade, which points to limited color depth or aggressive image processing.

Real refresh rate

The browser's frame timing shows the refresh rate your screen is actually running at, so you can confirm a 120, 144 or 240 Hz monitor is really set to it.

Motion clarity

Moving objects show how much blur, ghosting or smearing your panel has and whether motion stutters, similar to the well-known UFO test.

Reading the results and fixing common problems

My 144 Hz monitor shows 60 Hz

Set the refresh rate in your operating system (Windows: Settings > Display > Advanced display) and in the graphics driver. Use a DisplayPort or a high-speed HDMI cable that supports the rate. Battery-saving modes on laptops can also cap it.

I found a stuck pixel

A stuck pixel sometimes recovers after showing rapidly changing colors on that area for a while. A dead (always black) pixel usually cannot be fixed; check your monitor's pixel warranty policy.

The measured Hz jumps around

Close other tabs and keep this one in the foreground. Variable refresh (G-Sync / FreeSync) and power saving can make the reading float; it should settle near your set rate.

Moving objects look blurry

Some blur is normal on LCD panels. Turn on the monitor's overdrive or response time setting, avoid its most extreme level (it causes inverse ghosting), and check that the refresh rate is set to maximum.

Frequently asked questions

How do I check my monitor for dead pixels?

Open each full-screen color pattern in the Screen test and look carefully across the whole screen. A pixel that stays black on white, or one color on every pattern, is dead or stuck.

How do I check my monitor's refresh rate?

Open "Refresh rate & motion" and wait a few seconds. The measured Hz is the rate your screen is actually running at in this browser right now.

What is the difference between a dead and a stuck pixel?

A dead pixel receives no power and stays black. A stuck pixel is lit and stays one color, often red, green or blue. Stuck pixels can sometimes recover; dead pixels rarely do.

Does it work on phones, tablets and laptops?

Yes. Any screen with a modern browser works, including phones with 90 or 120 Hz displays.

Why does my refresh rate show lower than advertised?

The display may be set to a lower rate, the cable may not support it, or a battery or power-saving mode may be limiting it. Check the display settings first.