Lihat halaman ini dalam Bahasa IndonesiaVer esta página en españolVer esta página em portuguêsDiese Seite auf Deutsch ansehen

Controller / Gamepad Test

Connect a controller and press any button to start. This free gamepad tester shows every button and trigger, draws both analog sticks, measures stick drift and range, and tests vibration, for Xbox, PlayStation, Switch Pro and generic USB or Bluetooth pads.

Runs 100% in your browser, no data ever leaves your device
Loading the test…

How to use this test

  1. Connect the controller by USB, Bluetooth or its wireless dongle.
  2. Press any button. Browsers hide controllers until the first input, so nothing appears before that.
  3. Press every button and pull both triggers fully. Each one lights up and is counted.
  4. Let go of both sticks and press "Measure drift". Keep your hands off for 3 seconds.
  5. Roll each stick slowly around its full edge to check its range, then try the vibration buttons.

What this test checks

Buttons and triggers

Every button is shown with a press counter, and analog triggers show how far they travel from 0 to 100%, so a sticky or weak trigger is easy to see.

Stick drift

With the sticks untouched, the resting offset is measured over 3 seconds. Under 5% is healthy; above that suggests drift that a game may read as movement.

Stick range

Rolling a stick around its edge shows how far it reaches in every direction. A healthy stick reaches about 100% all the way round.

Vibration

The weak (high frequency) and strong (low frequency) motors can be tested separately, plus trigger rumble on controllers and browsers that support it.

Update rate and mapping

Shows the controller name, whether the browser uses the standard layout or raw mapping, the number of buttons and axes, and how often the state updates.

Reading the results and fixing common problems

No controller detected

Press a button after connecting; browsers stay silent until then. Check the cable or Bluetooth pairing, and close apps such as Steam that can take exclusive control of the pad.

Drift above 5%

Dust or a worn stick potentiometer is the usual cause. Rotate the stick firmly in circles, use contact cleaner if you are comfortable, or set a larger deadzone in your game. Hall-effect sticks do not wear this way.

Buttons are in the wrong place

With "Non-standard (raw)" mapping the browser does not know the layout, so buttons appear by number. The controller still works; games with their own mapping will handle it.

Vibration does nothing

Rumble depends on the browser and the connection. Chromium-based browsers such as Chrome and Edge support it for most Xbox and PlayStation pads; some browsers and Bluetooth connections do not.

Frequently asked questions

How do I test my controller online?

Connect it, open this page and press any button. All buttons, triggers and both sticks are then shown live, with drift, range and vibration tests below.

How do I check for stick drift?

Leave both sticks untouched and press "Measure drift". If the resting offset is above 5%, the stick is drifting. Between roughly 3 and 5% is slight drift that a deadzone usually hides.

Does it work with PS5 DualSense and PS4 controllers?

Yes. DualSense and DualShock 4 work over USB and Bluetooth in modern browsers. Buttons, triggers and sticks are read through the standard Gamepad API.

Does it work with Xbox and Nintendo Switch Pro controllers?

Yes. Xbox One, Series X|S and Switch Pro controllers work. Generic USB or Bluetooth pads also work, sometimes with raw button numbering.

Why is the vibration test not working?

The browser must support controller vibration for that pad. Chrome and Edge support it for most Xbox and PlayStation controllers; other browsers may not.