Mouse Test
Click, scroll and move inside the test area to check every part of your mouse. This free mouse tester counts each button, catches double-click faults, measures your clicks per second and shows exactly what your scroll wheel reports.
How to use this test
- Move the pointer into the test area. The right-click menu is disabled there, so you can test the right button.
- Press each button in turn: left, middle (wheel click), right, back and forward. Every press is counted.
- Scroll up and down, and sideways if your wheel tilts, and watch the wheel counters.
- Single-click a button many times and watch "Ghost clicks" to catch a double-click fault.
- Start the CPS test and click as fast as you can to measure your clicks per second.
What this test checks
Every button
Left, middle, right, back and forward are counted separately, with the duration of the last press, so a button that does not register or sticks stands out.
Double-click fault
Two clicks of the same button less than 40 ms apart are counted as a ghost click. A healthy finger cannot click that fast, so this points to a worn switch.
Scroll wheel
Up, down and horizontal scrolling are counted, together with the delta mode (pixels, lines or pages), so a wheel that skips or scrolls the wrong way is visible.
Click speed (CPS)
Click as fast as you can for 5, 10 or 30 seconds. The result is your clicks per second, with your best score kept for the session.
Pointer movement
Live position, movement delta, speed, pointer type and pressure, with a trail, to spot jumps or jitter in the sensor.
Reading the results and fixing common problems
Ghost clicks keep appearing
Your mouse is double-clicking on its own. This usually means the switch under that button is worn. Many mice can be repaired by replacing the switch; otherwise it is a warranty case.
A side button does nothing
Back and forward buttons sometimes need the manufacturer's software or have been remapped. Check the mouse software, then test again.
The scroll wheel jumps or goes the wrong way
Dust in the wheel encoder causes skipped or reversed steps. Short bursts of compressed air into the wheel often fix it.
The cursor jitters or jumps
Clean the sensor window, try a different mouse pad and avoid glass or glossy surfaces. If it continues, check the polling rate test for unstable reports.
Frequently asked questions
How do I test my mouse online?
Move the pointer into the test area on this page and press every button, scroll the wheel and move the mouse. All presses, scrolls and movements are shown live.
How do I check if my mouse double-clicks by itself?
Single-click one button many times. If "Ghost clicks" goes up, the mouse registered two clicks less than 40 ms apart, which a finger cannot do. That is a double-click fault.
What is a good CPS score?
Most people click about 6 to 8 times per second. With practice, 10 or more is common, and special techniques such as jitter or butterfly clicking go higher.
Can I test the back and forward buttons?
Yes. Buttons 4 and 5 (back and forward) are counted inside the test area, and the browser does not navigate away while you test them there.
Does this test work for a touchpad?
Yes for clicks, taps and scrolling. For multi-finger gestures on touchscreens, use the touchscreen test.
Related tests
Polling Rate Test
Measure mouse polling rate (up to 8000 Hz), controller update rate and keyboard repeat rate with stability graphs.
Open testKeyboard Test
Test every key live on a full layout. Finds dead keys, key chatter and ghosting / N-key rollover.
Open testScreen & Refresh Rate Test
Dead pixel & color test, gradient banding, real monitor refresh rate (Hz) and a moving-object motion test.
Open test